foundry flats forge volcanic brick 2 1/2"x8"x3/4" sample
product description + credits
* this product makes up pieces per and comes in pieces per box
each piece of the Foundry Flats FORGE line has been manufactured with an artisan approach. manipulated at different stages in production, the textural surfaces create a visceral experience and raku-industrial finish.
our volcanic shade has quickly become a modern classic for anyone favoring a deep sepia tone with waves of chalky white specks. volcanic is a stunning surface for minimal and maximal spaces.
about this collection
we scoured the country looking for a thin brick and discovered these foundry flats at a family-run business with a long history of working with clay.
sourced from materials located within 25 miles of the factory, the flats are solidly made with a body that reflects a color palette that is both modern and enduring.
made from clay and water, foundry flats are a classic american, affordable, and recyclable product offered in an array of earthy hues ranging from a sooty, volcanic black to a mineral-flecked shade of honey.
what grout joint size should i use?
we recommend a 3/8” grout joint with our foundry flats collection which allows for 6.54 bricks per square foot. should your project require a smaller joint, keep in mind that additional bricks will need to be ordered as our checkout calculations are all based on 6.54 bricks per square foot.
here are the pieces per square foot for a few other common grout joint sizes:
1/8” grout joint - 6.97 bricks per square foot
1/4” grout joint - 6.75 bricks per square foot
pieces per square foot comes to 7.2 when no grout joint is taken into account.
for our corner pieces, we also recommend a 3/8” grout joint, which allows for 4.5 bricks per linear foot. should your project require a smaller joint, keep in mind that additional bricks will need to be ordered as our checkout calculations are all based on 4.5 bricks per linear foot.
here are the pieces per linear foot for a few other common grout joint sizes:
1/8” grout joint - 4.68 bricks per linear foot
1/4” grout joint - 4.57 bricks per linear foot
pieces per linear foot comes to 4.8 when no grout joint is taken into account.
what grout type and color do you recommend?
clé recommends the use of mapei flexcolor cq grout with this collection. grout color selection is always up to our client and/or their design professional. however, clé is often asked for our opinion on best grout selections for our bricks. and due to the large array of grout colors that are now available, clé would like to offer this general guideline on a foolproof grout color selection for any of your clé bricks.
- first, have your professional brick contractor complete your brick installation, except for the grout portion.
- next, when ready to grout, ask your contractor to bring ALL grout color charts from his preferred grout manufacturers, for your review.
- lastly, choose a time of day when you are most pleased with the lighting in your space (either natural lighting, installed lighting or a blend of both). during that lighting and time of day, select the grout color that best matches your brick selection.
note that the full mapei flexcolor cq color catalogue contains 40 colors to choose from. visit the mapei website to view.
for more information about grouting please see our foundry flats installation & maintenance guide.
what are the key differences between standard issue and forge?
standard issue bricks are utilitarian and durable, well suited to almost any space - both interior and exterior. the standardized clay surface provides a uniform, clean modern look.
each piece of the forge line has been manufactured with an artisan approach. manipulated at different stages in production, the textural surfaces create a visceral experience and raku-industrial finish.
american made, both standard issue and forge bricks emphasize classic, industrial style and are manufactured to last and improve with age.
do foundry flats meet standard thin brick specifications?
foundry flats shall be selected by the architect/designer/owner from manufacturer’s standard sizes, shapes and glazes. foundry flats meets or exceeds ASTM-C1088 Type TBS or TBA
do i need to seal foundry flats bricks?
due to the texture of the bricks you must apply sealant or a grout release prior to grouting to minimize risk of grout haze and to allow for an easier clean up. however, if you choose to use grout as a design element then you don’t need to seal or use grout release prior to grouting. please see more information on how to do this under the separate foundry flats trade resource.
although unglazed thin bricks do not have to be sealed after grouting for dry applications (interior walls, fireplace surrounds), it is recommended that they are sealed when used on wet areas like backsplashes, showers, bathrooms and floor installations. grout lines and the brick surface should be sealed as the final step of installation for the above mentioned applications.
exterior walls require vertical weather flashing and waterproof, penetrating sealant. exterior floors must be installed above grade with waterproof, penetrating sealant. with application of miracle sealant, these bricks can have resistance to freeze/thaw issues.
for more information about sealing please see our foundry flats installation & maintenance guides.
do you offer trim for your foundry flats bricks?
we offer corner pieces for each of the bricks included in our foundry flats line. as for trim, at clé we follow the international model of no trim and highly recommend our clients to do the same. below are the trim alternatives we recommend for this collection.
- if your project needs to turn a corner either inwardly or outwardly, mitering the bricks to meet seamlessly in a corner gives it the cleanest, crafted finish.
- a visible brick edge can be sanded to make the side match the main surface of the brick.
- if you have a painted surface next to your brick, you can choose to paint the outer edge of the brick to match the painted surface.
- like with any of our bricks, you can also build out the sheetrock so that the surface of the finished sheetrock is flush with the surface of the brick.
how do i take care of my foundry flats bricks?
over time, a natural patina will occur on floors as they are maintained and naturally wear. bricks and grout lines can be cleaned using mild, pH neutral soaps with hot water and a bristled cleaning brush—this should be sufficient for most cleaning and stains - test before general use. always avoid harsh chemicals and acidic or alkaline cleaning products. do not allow water and liquids to sit on the brick surface. miracle tile & stone cleaner is effective as an ongoing maintenance cleaner and is gentle for everyday use.
if using a topical sealant, bricks will need periodic stripping and resealing. please refer to a professional for this maintenance. single coat reapplication of the penetrating sealant is required at least once a year.
see foundry flats installation & maintenance guide for more information.
how much variation should i expect?
foundry flat colors vary both in texture and color from brick to brick, with some individual bricks more than others. clé celebrates this variation resulting from our production methods and raw material choices. when specifying foundry flats, if color consideration is paramount, always work from a sampling of 3 or more bricks, which represents the range of color you can expect on the job.
due to the color and shade variations, it is very important to blend the bricks from all boxes once they arrive and place them in their installation area to ensure you have the layout you want before installing. do not install without blending bricks from all boxes.
as listed below, foundry flats forge bricks are rated v3 - v5 in color variation and t2 - t4 in texture variation as outlined in our tile variation reference guide:
foundry flats forge cast iron brick v3 t3
foundry flats forge alloy flux brick v5 t4
foundry flats forge braze brick v4 t2
foundry flats forge factory brick v4 t4
foundry flats forge sawdust brick v3 t4
foundry flats forge sediment brick v5 t4
foundry flats forge petrol brick v4 t2
foundry flats forge volcanic brick v5 t4
foundry flats standard issue bricks are rated v2 in color variation and t3 in texture variation as outlined in our tile variation guide.
why do you suggest i order at least 15% more than my measurements?
industry standard suggests adding at least 15% overage due to brick cuts, potential breakage, or future repairs.
for more information related to ordering and shipping, please be sure to visit our shipping and returns and delivery information resource pages.
rectangle - 2 1/2"x8"x1/2"
disclaimer: please note all dimensions are nominal and can vary plus or minus 1/8 inch.