zio & sons + clé zellige charred cedar 4" octagon / natural bouchon sample
product description + credits
* this product makes up pieces per and comes in pieces per box
drawing upon the rich mosaic patterns of morocco, this collection, in collaboration with designer anthony d’argenzio of zio & sons, offers two simple terracotta shapes that fit together–a 4" octagon and 1" bouchon–in a palette of neutral shades, resulting in countless combinations and ways to create a truly custom look.
the collection also includes pre-assembled mosaic borders perfect to frame floors, cap backsplashes, and more.
about this collection
inspired by authentic zellige, an old-world, timeless, classic tile, new york designer anthony d’argenzio, founder of zio & sons, has partnered with clé to create a collection of moroccan tiles that draw on the history of mosaic patterns presented in a flexible, modern way.
available in five octagon and bouchon options in different pairings and 4 borders that range from muted and subtle to dramatic, the collection has enduring appeal and works in both modern and traditional settings.
each octagon can be mixed with a contrasting bouchon to create countless pattern combinations for a truly custom look. the collection offers the outstanding variations of color and texture that are the markers of authentic zellige, and is perfect as an accent wall or backsplash, or even for a floor surface.
also included in the collection are four pre-assembled mosaic border designs to frame floors, cap backsplashes and more.
what grout joint size, type, and color do you recommend?
zellige is traditionally set without the use of any grout. in morocco the installations are done with a butt joint and no grout whatsoever–and they have withstood the test of time. however, at clé we recommend a slightly larger grout joint of 1/16, and using mapei flexcolor cq grout for all zellige and all applications other than pool and waterline installations that require mapei ultracolor plus fa grout.
important: contrasting grout color with zellige will highlight the thin hairline cracks/crazing found on the tiles and it will also fill in any pits, and/or chips. if you use a contrasting grout (i.e. white grout with black tile) please order 20-30% overage in order to cherry-pick the tile of the imperfections that are standard to zellige. additionally, you must make sure to apply a penetrating sealant or grout release prior to grouting in order to minimize the possibility of the contrasting grout curing in the inherent hairline cracks, pits, and/or chips.
for the octagon/bouchon bundle that has a combination of varied colors, we recommend matching the grout color to the octagon.
grout color selection is always up to our client and/or their design professional. however, clé is often asked for our opinion on best grout selections for our tiles. and due to the large array of grout colors that are now available, clé would like to offer this general guideline on a foolproof grout color selection for any of your clé tiles.
- first, have your professional tile contractor complete your tile installation, except for the grout portion.
- next, when ready to grout, ask your contractor to bring ALL grout color charts from his preferred grout manufacturers, for your review.
- lastly, choose a time of day when you are most pleased with the lighting in your space (either natural lighting, installed lighting or a blend of both). during that lighting and time of day, select the grout color that best matches your tile selection.
note that the full mapei ultracolor plus fa & flexcolor cq color catalogue contains 40 colors to choose from. visit the mapei website to view.
are there any cases where I may need a grout joint size larger than 1/16"?
in order to increase dcof in wet area applications (especially shower floors), we recommend broadening the grout joint size on the setting of the pan tiles and/or cutting the tiles into smaller pieces.
any additional recommendations for zio & sons + clé mounted borders?
zio & sons + clé border pieces come pre-assembled, revealing white setting material in between each piece. we recommend applying mapei grout refresher onto the setting material to match the grout color you select for your installation. mapei grout refresher comes in the same colors as mapei ultracolor plus fa and mapei flexcolor cq, allowing the color to be consistent and matched easily to your grout. for more information about grouting please see our zio & sons + clé installation & maintenance guide.
do i need to seal zio & sons tiles?
IMPORTANT: natural zellige must be sealed on all applications before and after grouting as the final step of installation in order to be cleaned easily and to avoid staining.
natural zellige in low commercial traffic floor installations and in areas susceptible to grease build-up we recommend three to five coats of miracle mira matte top-coat sealant in addition to sealing for natural zellige.
natural zellige on a busy kitchen backsplash we recommend applying the clé top coat kit to the tile surface and grouted areas instead of using our recommended sealant.
IMPORTANT: if zio & sons tiles are being grouted with a contrasting grout color vs. a matching one, then you must also apply a penetrating sealant or grout release prior to grouting in order to minimize the possibility of the contrasting grout curing in the inherent hairline cracks, pits, and/or chips.
dry applications of glazed zellige is an exception as it does not require sealed as the final step of installation.
glazed zellige can be installed on pool and fountain water lines in non freeze/thaw locations but only with application of a waterproofing, penetrating sealant.
all wet area installations of glazed zellige (backsplashes, showers, steam showers, pool & fountain water lines), grouted areas and possible grouted pits, chips and areas of visible crazing must be sealed as the final step of installation.
exterior walls require vertical weather flashing and waterproof, penetrating sealant.
for more information about sealing please see our zio & sons + clé installation & maintenance guides.
do you offer trim for your zio & sons tile?
at clé we follow the international model of no trim and highly recommend our clients to do the same. below are the trim alternatives we recommend for this collection.
- if your project needs to turn a corner either inwardly or outwardly, mitering the tiles to meet seamlessly in a corner gives it the cleanest, crafted finish.
- another way to complete your tiling is to run a bead of caulk or grout along the exposed tile edge (not suitable for natural zellige).
- if you have a painted surface next to your tile, you can choose to paint the outer edge of the tile to match the painted surface (not suitable for natural zellige).
- like with any of our tiles, you can also build out the sheetrock so that the surface of the finished sheetrock is flush with the surface of the tile.
how do i take care of my zio & sons tiles?
over time, a natural patina will occur on floors as they are maintained and naturally wear. depending on specific site conditions, zellige are subject to wear over time. this inherent traffic pattern is a highlight of using zellige and should be both anticipated and favored.mild, pH neutral soaps should be sufficient for most cleaning—test before general use. clean using soft materials, like a cloth, instead of coarse materials. always avoid harsh chemicals and acidic or alkaline cleaning products. grout lines can be cleaned with warm water and a soft bristled cleaning brush. immediately clean up spills—do not allow liquids to sit on the tile surface. most stains can be removed with a pH neutral dish soap, hot water and the scrub side of a sponge.
topical sealants on natural zellige will require periodic stripping and re-application of sealant—please refer to a professional for this.single coat reapplication of the penetrating sealant is required once a year in shower applications due to the continuous exposure to water. for glazed zellige, this includes all grouted areas. for natural zellige, this includes the tile surface and all grouted areas. reapplication is needed more often if installation is in a steam shower or pool/fountain waterline. please refer to a professional for this.
see zio & sons + clé installation & maintenance guide for more information.
what type of finish should i expect with this collection?
in our zio & sons collection, the weathered white and moroccan sea salt are glazed and glossy, whereas the dark charred cedar is glazed and matte. our natural zellige has slightly different sealing requirements and usage areas due to it being unglazed and very porous.
how much variation should i expect?
zellige are created from natural glazes, pigments and terracotta clay. every one of these natural materials is completely unfiltered allowing for maximum variation and irregularities. plus, zellige tiles are fired in hand made kilns that are fueled using olive pits. all of this handcraft is what makes zellige so magically varied - tile to tile. please enjoy the extreme variation of color, shade and surface texture.
what does this mean to you? your zellige order will contain the following: noticeable variations in thickness, size, shade and color. if you want a uniform looking glazed tile we do not suggest purchasing zellige.
DIFFERENCES BETWEEN SIZES OF ONE COLOR: it is impossible to guarantee a perfect color match across different sizes of the same zellige glaze if installing them together - some variation is to be expected between sizes. if you wish to have your tiles made to order for optimal color continuity, please email email@example.com to inquire.
IMPERFECTIONS: you can also expect your tiles to be affected by cracks, chipped edges, pitted glaze surfaces, crazing and iron spots. once installed properly and grouted, the above issues will bring you the varied zellige look that is so treasured by the design world. if the above irregularities differ from your expectations, clé highly recommends you select another tile that will yield more surface regularity.
THE IMPORTANCE OF BLENDING: due to the noticeable color and shade variations, it is very important to blend the tiles from all boxes once they arrive and place them in their installation area to ensure you have the layout you want before installing. do not install without blending tiles from all boxes.
zio & sons glazed zellige tiles are rated 'level 3 medium' for color and texture variation, and 'level 3 heavy' for size variation. unglazed (natural) zellige is rated 'level 2 slight' for color variation, and 'level 3 medium' for texture and size variation.
read more about the ratings in our tile variation guide.
what's crazing, and should this be expected with zio & sons tiles?
zio & sons tiles are made by hand and can show visible crazing. crazing refers to the hairline cracks which may occur in the glaze surface of tile after firing and is common in handcrafted tile.
are there best practices for sampling zio & sons + clé zellige?
due to the high variation in color of our handmade zellige tiles as well as the variation in texture of each tile (pits, specks and chips from the wood-firing process) we strongly encourage sampling more than one piece to get a better sense of what the tile has to offer.
how will my zio & sons + clé zellige samples compare to my actual order?
as noted in the variation and add on orders sections of our faqs, color and size variation between batches (kiln loads) of zellige, in addition to variation from tile to tile, is to be expected given the handcrafted nature of the product. this makes it unlikely that your sample will be a perfect match with your actual order.
if you want a uniform looking glazed tile we do not suggest purchasing zellige.
what should i expect with my order of zio & sons + clé zellige?
zio & sons tiles travel a long distance and are in the traditional way packed with sawdust to protect the tiles from breaking.
dust and residue from shipping should be cleaned prior to installation. this is typically done as tile is being set with a quick dip of each tile into a water bath.
why do you suggest i order at least 15% more than my measurements?
industry standard suggests adding at least 15% overage due to tile cuts, potential breakage, or future repairs. note that due to the firing methods and raw materials used to create glazed clay tiles, your order of zio & sons tile will have a percentage of tiles greater than 15% with cracks, crazing, iron spots, edge-chipping and pits through the glaze to the clay body.
clé WARNING: having an installation with tiles that experience any of the above imperfections is the traditional look for zio & sons installations. any editing of these naturally occurring imperfections from your tile shipment will greatly reduce the traditional appeal of your installation. if these imperfections do not fit your project’s needs we recommend ordering 20-30% overage. this allows your contractor to cherry-pick these imperfections from your order.
is it possible to purchase more of the same material after my initial order (i.e. place an add on order)?
color and size variation between batches (kiln loads) of zellige is a normal occurrence and to be expected given the handcrafted nature of the tile. please keep this in mind when calculating your order, and be sure to purchase enough material.
octagon - 4"x4"x3/8”
bouchon - 1 1/4"x1 1/4"x3/8”
mounted border - 3 ½”x7”x1/2”
disclaimer: please note all dimensions are nominal. additionally, dimensions between tiles can vary +/- 1/4 inch.
interior floor, interior wall, exterior wall, shower floor, shower wall, steam shower, residential low traffic, backsplash, kitchen, fireplace surround, pool & fountain waterline (GLAZED tiles and non-freeze thaw locations only). Limit all exterior usage to locations not affected by freeze thaw.